Wind power fiber integrated slip ring LPW-0550-0615-18S-F

Wind power fiber integrated slip ring LPW-0550-0615-18S-F can transmit single or multiple optical fiber signals, multi-channel rotation, can be mixed transmission power supply, control signals, 

instruments and computer automatic control required for micro power signals; It can be used with the traditional electric slip ring to transmit power and high-speed data; Safe and reliable, 

no leakage, no electromagnetic interference, can be long-distance transmission.

Wind power slip ring is mainly composed of rotor part and stator part. The rotor part is mounted on the rotating shaft of the wind turbine and is connected to the rotating wind turbine assembly. 

The stator part is fixed on the tower barrel or the base of the wind turbine.

Power and signal connections are established between the rotor and the stator by means of sliding contacts.

The contact between the stator and the rotor uses precious metals such as gold and silver and some high-performance alloy materials, because the contact material must have low resistance, 

small friction coefficient, corrosion resistance and other characteristics. Technically speaking, if the resistance of the slip ring is too large, when the voltage at both ends is too large,

 it may be due to overheating to burn the slip ring, if the friction coefficient is too large, the stator and the rotor keep friction, the slip ring will soon wear away, thus affecting the service life.

As part of a rotating mechanical system, JINPAT's wind power slip ring has good mechanical strength and stability, and can maintain the stability of signal transmission under high-speed rotation 

and harsh environmental conditions. These slip rings usually have dustproof, waterproof, corrosion resistance and other characteristics to meet the needs of long-term outdoor operation of wind turbines. 

Through the wind slip ring, the wind power system can efficiently and stably convert wind energy into electricity, contributing to the sustainable development of the renewable energy industry.

At the same time, according to the external environment of the operation of the fan, such as: wind power running in the Gobi, 

mountains and beaches and other external conditions with large sand and high humidity, we can provide wind power slip rings with a protection level of IP65. If you are near the sea or offshore, 

we can provide wind power slip rings that meet the C4 corrosion protection standard.

If you have special needs, please contact us in time so that our sales engineers can recommend suitable slip ring models and customized solutions for you.